Publicidad
INTRODUCTION
Thank you for purchasing the SubZero PS09 Pedal
Power Supply. To get the most out of your product,
please read this manual carefully.
BOX CONTENTS
• 1 x Adapter with four plug heads (EU, UK, US, AU)
• 7 x Power cable
• 1 x Reverse polarity cable (red tip adapter)
• 1 x Five head daisy chain
FEATURES
• Pedal power supply provides support for up to
eleven pedals.
• Suitable for a variety of pedal types with various
voltage outputs.
• Compact design ensures effortless integration into
your pedalboard.
• Comes complete with cables and adapters
CONSIDERATIONS
Only use the supplied 18V AC/DC Adapter to
connect to the input of the power supply.
The SZ-PS09 should only be used to power DC
pedals.
The polarity of all DC outputs are CENTRE
NEGATIVE - Centre positive pedals should only be
connected in conjunction with the inverse polarity
cable included (red connector).
Pedal polarity should be identified before being
connected to prevent damage to the pedal.
Voltage requirement of the pedal should be
identified before being connected to prevent
damage to the pedal - Pedals can be damaged
if powered using a voltage that exceeds what is
required by the pedal.
When using the included 5 head daisy chain cable,
the total power consumption must not exceed the
total number of Amps available by the output in
use - For example when using the 9V 1A output,
all pedals must operate at 9V with a total power
consumption of less than 1A.
The total output power across all outputs must not
exceed 36W.
To calculate the total output power:
Calculate the power consumption in Watts (W)
for each individual pedal by multiplying the input
voltage (V) by the current requirement in Amps (A).
(note that 100mA=0.1A)
For example, a pedal that requires 9V 50mA will
consume 9 x 0.05 = 0.45W
Add the power consumption for all the pedals
together.
POWER OUTPUTS
5 x 9V 100mA output
1 x 9V 1A output
2 x 12V 1A output
1 x 18V 2A output
3
Publicidad
