1.- Locate the unit at the proper counter height, in an area that is convenient for use. The
location should be level to prevent the unit or its contents from accidentally falling, and
strong enough to support the weight of the unit.
2.- Do not place anything on top of the infrared heating lamp; doing so could damage the unit
or subject personnel to possible injury.
3.- When setting up the unit for operation, make sure power to the unit is off. Failure to do so
could result in personal injury.
4.- Unit is not weatherproof. For safe and proper operation locate the unit indoors where the
ambient air temperature is a minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
5.- Do not locate the infrared heating lamp in an area subject to excessive temperature or
grease from grills, fryers, etc. Excessive temperature could cause damage to the unit.
6.- Do not place the infrared heating lamp in an area that restrict air flow around the front or rear
of the unit.
7.- Some exterior surfaces on the unit will get hot. Use caution when touching these areas to
avoid injury.
UNPACKING
Open the large box. Remove all packing materials and protective covering from the unit and
parts. Do not discard the wrapping until you have checked that the blender is working correctly.
Make sure to remove the lamp protections before the first use.
1.- The power supplied to this unit must comply with electrical requirements on it's label.
Damage or fire may result if the incorrect power is used.
2.- Turn off all switches and unplug the unit should an emergency situation occur.
3.- Keep hands and other body parts clear of very hot parts. Otherwise injuries may result.
Of this device or in the case of a unit being used which has been abused; damaged either
accidentally or intentionally, modified, improperly installed or used in any manner contrary to
those included in the product instructions, guantee will automatically be canceled.
4.- The machine can not be washed or placed into water as it is not a waterproof device.
Putting the unit into water may result in electric shock and will damage the mechanical and
electrical components.
5.- Turn off and unplug the unit when performing maintenance or cleaning the unit.
6.- Turn the machine off if it appears to be operating in an unusual manner.
7.- Please contact the seller if you lose the operations manual for a replacement.
8.- Please contact the seller if you find other problems not covered in the operation manual.
20
CAUTIONS
!
INSTALLATION
NOTICE