LUND Genesis Instrucciones De Instalación página 3

Installation Steps
Remove plastic cap from the end channel on both sides. Push tab in while sliding out.
7
8
For ease of installation the side rails have
been marked with the clamp locations.
Place a clamp centered at each of the
locations marked on the side rails. Bolts
can be loosened to help with installation
end adjustment.
Insert the upper clamp all the way into the
side rail. The 7/16" bolt must be tight-
ened first and the proceed to tightening
the upper bolt with the allen wrench (G)
provided.
9
All manuals and user guides at all-guides.com
NOTE: Actual application may vary slightly from drawings.
Center the frame on the truck. Next center the frame from side to side.
Page 3 of 5
B C
G
C
F