Kunft KTE3513 Manual De Instrucciones página 8

2-2 Selecting the Operating Mode
Press the button to select the program (Program No. starts to
blink).
Press or to select the operating mode:
, ~ ,
Then press to confirm.
The unit will run following the newly selected program.
Note: During this period, if no buttons are pressed, the selection is
automatically completed 5 seconds later.
2-3 Daily program
The daily program has three kinds of operating modes:
Comfort mode: ( and program content displayed as ), An
adjustable range from 10°C to 35°C;
Economic mode: ( and program content displayed as ), An
adjustable range from 10°C to 35°C;
The temperature should be no higher than is comfortable;
Anti-frost mode: ( and program content displayed empty), 7°C
is fixed.
If a daily program was chosen, the unit will repeat the program every
day.
Different program used for the first time as follows:
P1:
P3:
P5:
P2:
P4:
P6:
14
electric radiator 600W
P7:
P9:
2-3-1 Setting the Time
Same as in 2-1-1, then the unit will automatically adjust to the current
time and running accordingly.
2-3-2 Temperature setting
Hold the button for 3 seconds until the
same time the original comfort temperature will start to blink.
Press the or the button to set the target comfort temperature.
Press to confirm, and the
economy temperature also starts to blink.
Press the or buttons to set the target economy temperature.
Use to confirm it temperature setting is completed. The unit is
now operating in comfort mode.
The temperature will then be kept in memory.
2-3-3 Setting the Daily Program
Amending a pre-set program to your set times
Press the button to choose the program from
want to set.
Then hold the button for 3 seconds to enter the program setting
and at this time will be displayed on the screen.
will be shown until the setting is completed, and the heating will
stop during the setting.
The date does not show, and the time is 00:00.
The mark starts to blink rapidly.
First segment of selected program,
such as following (when the selected
daily program is P1):
EN
KTE3513
P8:
symbol blinks, at the
symbol will start to blink, the original
~ that you
15