Output Power; Using The Ac Outlet Power Receptacles - Wagan Tech LITHIUM CUBE 1200 Manual De Usuario

OUTPUT POWER

Using the AC Outlet Power Receptacles

The Lithium Cube's inverter can operate most AC appliances or a combination of appliances up
to 1,000 watts. Operating time (run time) is dependent on the AC load (watts) and the charge
and condition of the Lithium Cube's internal battery. Be sure to turn off or disconnect any AC
appliance not in use.
Converting DC battery power to AC generates heat. To minimize heat buildup and possible
thermal shutdown, remove obstacles blocking or hindering airflow between the intake and
exhaust sides of the Lithium Cube. Ambient temperatures above 77 ºF will reduce the Inverter's
ability to cool effectively, thus affecting operating times.
This inverter produces Pure Sine Wave (PSW) AC, which mimics the same power coming from
your wall outlets at home.
To use the AC Power Inverter:
1. Connect the AC appliance or appliances to any AC Outlet.
2. Turn the power inverter ON by pressing the AC button.
3. Turn on one AC appliance and observe the power indicator.
4. After appliance use, turn OFF the AC button.
5. Remove AC appliance plug(s) from the AC outlets on the Lithium Cube
6. Recharge the Lithium Cube as soon as convenient.
Note: The AC output has an auto-shutoff override feature that will keep the AC inverter on until
it is manually shut off. This is useful for AC appliances that have intermittent power draw. To
override the auto-shutoff, press and hold the AC power button for 3 seconds until the AC icon
on the display begins to flash. The AC icon will continue to flash until this function is disabled or
shut off. Warning: Use of this function for a prolonged period of time could cause excessive
battery drain.
Note: The cooling fan turns off and on when needed to keep the internal components cool. The
cooling fan helps maintain the Lithium Cube's internal temperature when products with high
power requirements are in use.
12V DC Accessory Outlets
DC Output Type
DC port
DC socket
Overloading the DC port will trip a safety circuit. Remove the overload to restore power to the
DC output ports.
CAUTION—Do not insert an automotive cigarette lighter into the socket. There is no pop-out
feature and excessive heat may damage the socket.
Wagan Tech and wagan.com are trademarks of Wagan Corporation
User's Manual—Read before using this equipment
Capable Amperage
5A
10A
© 2021 Wagan Corporation. All Rights Reserved
7