Dvd Mode; Dvd System Setup; General Setup Page; Audio Setup Page - Best Buy EASY HOME COMBO HD Manual De Usuario

User Manual // Easy Home Combo HD

DVD MODE

DVD system setup

When the unit is working, press the select key to enter setup menu:
Press the right directional button to move cursor to the desired setup page, and press the select key to confirm.
Press the left o right directional button to move cursor to the desired setup item, and press the select key to confirm.
Press the up directional button to return to last setup item.
Note:
1. Move cursor to the relevant item, the menu showed at the bottom of the screen accordingly.
2. Some menu setup is related with other setup and status ,if it is gray, cannot setup.
3. The setup can be memorized continue through power off.
4. When the unit stops playing and opens the tray, it can enter the initial setup page.

General Setup page

TV Display
· 4:3panscan: When the unit connects with TV set, wide image is showed on the whole screen, but a part
is cut.
· 4:3letterbox: When the unit connects with TV set, playing wide image, there are black bands showed on
the up and down screen.
· 16:9: Choose this when the unit connects with wide screen TV set.
Angle Mark
Select display angle, when playing multi-angle DVD disc.
OSD Language
Select operation language.
Closed captions
This function is ineffective if no caption record in the disc. If the caption is closed, press the caption key on
the remote control to open captions function to select captions language.
Screen Saver
When the unit is in stop mode, a moving picture will appear several minutes later if screen saver is set on.
Screen saver will protect the TV screen.
HDCD
Setup different mode among 1x and 2x according to different audio signal source.
Note: some amplifiers cannot support 2x signal, and may lead to abnormal sound from the speaker.

Audio setup page

Downmix
In stereo output mode,the center speaker and rear speaker on this page cannot setup. Configurable only in
audio 5.1 mode.
Digital output
(SPDIF/RAW): when the unit and the amplifier are connected by coaxial and optical cables, please select this
item; when it playbacks disc of Dolby digital, DTS and MPEG, the coaxial or optical output will output the
corresponding digital signal, in this case, the connected amplifier should have the function of decoding Dolby
digital, DTS and MPEG.
16
All manuals and user guides at all-guides.com
General setup Audio setup Video setup Initial setup