Famastil F-POWER Manual De Instrucciones página 21

ASSEMBLY INSTRUCTIONS
Before assembly, make sure that the tool is
FITTING A DRILL BIT IN THE CHUCK
01
Open the chuck by turning the
sleeve counterclockwise (PIC 1).
02
Insert the bit shaft into the chuck
(PIC 2).
03 Insert the chuck key into each hole
in the side of the chuck and turn
clockwise until tight (PIC 3).
OPERATING INSTRUCTIONS
WARNING! Let the tool work at its own pace. Do not overload.
WARNING! Before drilling into walls, floors or ceilings,
check for the location of wiring and pipes.
All manuals and user guides at all-guides.com
WARNING!
switched off and unplugged.
PIC 1
PIC 3 PIC 2
21