FOREVER AirThin WDC-115 Manual De Instrucciones página 2

GB
GB
Thank you for purchasing the wireless charger WDC-115 by Forever. Before use please refer to
the User's manual, and save it for the future reference. Do not disassemble the device on your
own – all repairs should be done by a service technician. Use only original parts and accessories
provided by the manufacturer. The device should not be exposed directly to water, moisture
sunlight fire or other heat sources. We hope that the product by Forever fulfils your expectations.
Importer's data:
TelForceOne S.A.
ul. Krakowska 119
50-428 Wrocław
Poland
Designed in Poland
Produced in PRC
Input voltage: 5 V ⎓ 2 A; 9 V ⎓ 2 A
Specification
Standby power consumption: < 0,1 W
Power: 7,5 W/10 W/15 W
The type of charging: wireless
Charging rate: < 8 mm
Cable length: 1,0 m
Compatibility: with devices supporting Qi technologies
Type of USB socket: USB-C
Weight: 50 g
Maximum radiated power for frequency 110 – 205 kHz is -10,42 dBm EIRP
TelForceOne S.A. declares that the product is compatible with requirements and other relevant
provisions of the 2014/53/UE directive. You can download the declaration of product on the
website https://manual.forever.eu
Way of use
To start using the charger, connect it to the power supply source – e.g. smartphone wall charger,
with the USB-C cable. When connected it's ready to use. Make sure your phone is supporting
Qi standard, and place it in the middle of the charging surface, charging will start automatically.
When your device is fully charged, take it off the charger and unplug it from the power source.
NOTES: for more effective charging, the device should be positioned correctly. The device to
be charged must be directly above the charger coil, which is located in the center of the coil -
otherwise charging may not be performed properly. It is recommended to remove all device
protections, e.g. cases, covers.
Safety
- Read and keep the manual for the future reference.
- Do not remove the device cover. There are no parts which can be repaired by a user. Any repairs
should be performed by qualified serviceman.
2