Audio Input - Thompson HOME CINEMA 5.1 HTS4500W Manual Del Usuario

LOUDSPEAKER CONNECTION
Wired speaker output (20)
• Connect both front wired speakers respectively to FR and FL.
• Connect the center speaker to CEN using the provided cable.
Note : Connect the "Black/White" cable to the "Red" terminal and the "Black" cable to
the "Black" terminal.
Wireless speaker output
• Plug in the two wireless speakers to a sector socket.
Cautions
• To avoid interference, do not place the speakers near the TV screen.
Right speaker Left speaker
HOME CINEMA 5.1
HTS4500W
CONNECTING AN OPTIONAL APPLIANCE
Audio sources can be connected to the device as follows:

AUDIO INPUT:

Audio input 5.1: (12) (13) (14) (15) (16) (17)
• Connect the analog outputs 5.1 of a DVD/Blu-ray player to terminals FR, FL, SR,
SL, CEN and SW respectively.
Auxiliary input, 2 channels: (18) and (19)
• Connect the RCA/RCA analog audio cable (not supplied) to a DVD/Blu-ray/TV
player audio output then to inputs (18) and (19).
• Connect the RCA/3.5 analogue audio cable to the headphone socket of a MP3/
Smartphone player then to inputs (18) et (19).
Coaxial inputs (cable provided): (10) and (11)
• Connect the DVD/Blu-ray player coaxial output to inputs COAXIAL2 (10) or
COAXIAL1 (11).
Optical input (cable provided): (9)
• Connect the DVD/Blu-ray player optical output to input OPTICAL (9).
Note: For certain Dolby digital encoded disks, if no sound is reproduced, it is necessary
to set the audio output of the DVD/Blu-Ray player to PCM.
13 EN