cecotec FAST&FURIOUS 8010 VITAL Manual De Usuario página 19

ENGLISH
operated under MAX steam rate and the indicator of MAX steam rate is turned steady on.
Water spray button
Press the water spray button to activate the water spray function. The spray nozzle will spray
water mist. Release the water spray button to stop the function.
Clean indicator
The appliance needs to be cleaned when the clean indicator lights up and remains on. It will
blink when the appliance is being cleaned.
Clean button
Before activating the clean function, make sure the temperature knob is turned to the Max.
setting and that the device is set to the steam mode. Press the steam trigger once for the water
spray button to return to its original position.
The appliance must be cleaned when the clean indicator turns steady on. Before cleaning,
prepare a container with a capacity of more than 300 ml for collecting the waste water.
Hold and press the "Clean button" for 2 seconds. When the buzzer sounds, the appliance will
enter into the cleaning mode and the clean indicator will blink. The cleaning process will last
for 3 minutes.
The clean indicator will turn off. If another cleaning cycle is required, hold down the clean
button for 5 seconds. When the buzzer sounds, the appliance will enter into the cleaning mode
and the clean indicator will blink. The cleaning process will last for 3 minutes.
Cord winding groove
When not in use, the steam supply hose and power cord can be wound along the cord winding
groove for storage.
Fig. 5.
Note: The appliance will shut off automatically if all the indicators start blinking after being
powered on, indicating the appliance has malfunctioned. Stop using the appliance and contact
the Technical Support Service of Cecotec if this happens.
Dry ironing
Place the iron on the thermal insulation stand of the unit base.
Plug the power cord into the outlet. The temperature indicator and the indicator of MAX. steam
rate will turn on.
Turn the temperature knob to select the desired temperature setting depending on the
garment's fabric. The iron wills start heating up.
The light indicator will turn off when the desired temperature has been reached. Once it has
36 FAST&FURIOUS 8010 VITAL
FAST&FURIOUS 8020 FORCE
FAST&FURIOUS 8030 ULTIMATE
turned off, the iron is ready to use.
Warning: Always allow the device and especially its soleplate to cool completely down before
touching or handling it.
Steam ironing
Recommendation: To lengthen the appliance's service life, use purified water.
Place the unit base on a stable, flat surface.
Open the water inlet cover, fill the water tank with water through the filling opening. Do not
exceed the MAX mark on the tank: 2L.
Place the iron on the thermal insulation stand of the unit base.
Plug the power cord into the outlet. Turn the temperature knob, the MAX. steam rate indicator
will turn on by default. Choose between MAX and ECO steam rate, select the desired steam
rate for each garment according to your requirement. Ensure there is enough water in the tank.
Turn the temperature knob to select the desired temperature setting depending on the
garment's fabric. The iron wills start heating up.
Ironing tips
Always check if the garment to be steamed has a label with instructions for ironing, and if it
has, follow the instructions.
If the fabric consists of various kinds of fibers, always select the lowest ironing temperature.
Synthetic fibre and silk fabrics should be ironed on their inner side to avoid them from being
damaged.
Velvet and other textures that rapidly become shiny should be ironed in one direction with light
pressure applied. Always keep the iron moving.
Pure wool fabrics (100% wool) may be ironed with the steam iron. Use a dry cloth as a mat and
then select the corresponding fabric setting for ironing.
Never iron over zip, rivet in the cloth, this will damage the soleplate.
Before activating the clean function, make sure that the water in the tank is sufficient, and
prepare a high temperature-resistant container to be placed under the soleplate for holding
the dirty water sprayed from the steam hole of the soleplate during cleaning.
After a few minutes, the temperature indicator will turn off indicating the soleplate has reached
the selected temperature and the iron is ready to use with steam.
Press the steam trigger to activate steam ironing. Release it to stop.
Note: Water may drip during spraying steam function when the temperature is set at the low
settings.
Warnings:
Do not activate the steam button when the iron is placed on the unit base to avoid being
ENGLISH
FAST&FURIOUS 8010 VITAL 37
FAST&FURIOUS 8020 FORCE
FAST&FURIOUS 8030 ULTIMATE