Inserting The Batteries Into The Remote; Connect Power; Important; Antenna Connection - Onwa LED43FHSTV Manual De Instrucciones

To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.
Notes:
If you turn the TV off, this circle starts again
beginning with the volume setting.
Main menu OSD cannot be displayed via control
button.
Operation with the Remote Control
Press the Menu button on your remote control to
display main menu screen. Use the directional buttons
to select a menu tab and press OK to enter. Use the
directional buttons again to select or set an item. Press
Return/Back or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source button on your remote control consecutively
to select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume
by using the Volume +/- and Programme +/- buttons
on the remote.

Inserting the Batteries into the Remote

Connect Power

IMPORTANT: The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL
INPUT (ANT) socket located on the back of the TV.
TRADEMARK ACKNOWLEDGMENT
The terms HDMI and High-
the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
Lift the cover on the back
of the remote gently.
I n s e r t t w o A A A
batteries. Make sure the
(+) and (-) signs match
( o b s e r v e c o r r e c t
polarity). Place the
cover back on.
English - 62 -
the double-D symbol are trademarks of Dolby Laboratories.
YouTube and the YouTube logo are trademarks of
Google Inc.
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
Equipment bearing these symbols should not be
disposed as general household waste.
You should look for appropriate recycling facilities and
systems for the disposal of these products.
Battery
Products
TV Broadcasting
Receiving Channels
Digital Reception
Number of Preset
Channels
Channel Indicator
RF Aerial Input
Operating Voltage
Audio
Audio Output Power
(WRMS.) (10% THD)
Power Consumption (W)
Weight (Kg)
TV Dimensions DxLxH
(with foot) (mm)
TV Dimensions DxLxH
(without foot) (mm)
Display
Operation temperature
and operation humidity
Manufactured under license from
Dolby Laboratories. Dolby and
Notice: The sign Pb below the
symbol for batteries indicates that
this battery contains lead.
PAL BG/DK/II'
SECAM BG/DK
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
Fully integrated digital
terrestrial-cable TV
(DVB-T-C)
(DVB-T2 compliant)
1 000
On Screen Display
75 Ohm (unbalanced)
German+Nicam Stereo
2 x 8
75
9,1
220 x 974 x 615
64/93 x 974 x 572
43"
0ºC up to 40ºC, 85%
humidity max