IMPORTANT SAFETY INSTRUCTIONS:
Read this manual thoroughly before first use and keep it in a safe place for future
reference. To reduce risk of fire, electric shock, or injury to persons:
• For indoor and dry location use only.
• Improperly connecting the grounding wire can result in the risk of electric shock.
Do not modify the power cord plug provided with the product. Never remove the
grounding prong from the plug.
• Do not plug into another power bar or extension cord.
• Do not use the product if the power cord or plug is damaged. If damaged, have it
repaired by a service facility before use. If the plug does not fit the outlet, have a
proper outlet installed by a qualified electrician.
• Do not abuse the power cord. Never use the power cord to carry the product
or pull the plug from an outlet. Keep the power cord away from heat, oil, sharp
edges, or moving parts.
• Do not look directly into the LEDs when operating.
• Keep away from liquids, oils, petrol, and all chemicals.
• This is not a toy. Keep away from children.
• Turn off and unplug from outlet when not in use.
• Keep proper balance and footing at all times. Do not overreach the product.
• Always unplug the the product from the power source before performing any
maintenance.
• Do not overload the outlets or USB ports.
• Power will still run to the product even after the LED lifespan runs out.
• This product must always be used in accordance with all electrical and safety
codes and ordinances, including the most recent National Electric Code (NEC)
and with the Occupational Safety and Health Act v Volume 1 on General Industry
Standards and interpretations.
CAUTION: Risk of electric shock. Do not use in or near wet locations such as
kitchens or baths.
CAUTION: Risk of electric fire. Do not charge electrical devices while stowed in
storage compartment.
CAUTION: Risk of electric shock. Do not use the product if the clear protective glass
is broken or removed.
WARNING:
• LED light output is strong enough to injure human eyes. Precautions must be
taken to prevent looking directly at the LED.
• If the product is damaged, it shall be exclusively replaced by the manufacturer
or the service agent or qualified person in order to avoid a hazard.
• The warnings, precautions, and instructions discussed in this manual cannot
cover all possible conditions and situations that may occur. The operator must
understand that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
2