Valet Mode - Pyle 2R Serie Manual De Instrucciones

EMERGENCY OVERRIDE
If the transmitter becomes lost or fails to
operate, the system can be disarmed by using
the emergency override feature.
To override the system:
1. Enter the vehicle.
• The alarm will trigger.
2. Turn on the ignition key.
3. Press the Valet switch for 3 seconds.
• The siren will stop sounding.
• The starter defeat will be bypassed.
• The system will enter valet mode.

VALET MODE

When the system is placed into the Valet Mode
the security system will be disabled. However,
the optional keyless entry and trunk release
features will still function if installed. The valet
feature may be accessed using the valet switch
or using the remote transmitter.
To enter or exit valet mode using the switch:
1. Be sure the system is disarmed.
2. Turn the ignition key on.
3. Press and hold the valet switch for 3
seconds.
• The siren will chirp once to enter valet
or twice for exit.
• The LED will turn on solid indicating
the system is in valet mode, or turn off
indicating valet mode exit.
STATUS INDICATOR (LED) FUNCTIONS
On Solid = Valet Mode
On Solid when not in valet = Open Zone
Slow Flash = System Armed
Rapid Flash when disarmed = Passive
Arming
Rapid Flash when armed = Tamper Alert
All manuals and user guides at all-guides.com
3
To enter or exit valet mode using the remote:
1. Be sure the ignition key is off.
2. Press transmitter button 2 then button 1
and hold for 3 seconds.
• The siren will chirp once to enter valet
or twice for exit.
• The LED will turn on solid indicating
the system is in Valet Mode, or turn off
indicating Valet Mode exit.
OPTIONAL TRUNK RELEASE
Press button 3 for approximately 2 seconds to
open the trunk.
O PTIONAL TRUNK DISARM
The trunk disarm feature allows the alarm to
disarm automatically whenever transmitter
button 3 is used to activate the optional trunk
release. This eliminates having to first disarm
the alarm before activating the trunk release.
This feature must be programmed during
installation.
REMOTE SENSOR BYPASS
To arm the system and bypass the shock sensor,
press button 1 to arm, then within 2 seconds
press button 4. The siren will chirp once and
sensors will be ignored until the system is
disarmed and rearmed.
PARKING LIGHT INDICATIONS
1 Flash = System Armed
2 Flashes = System Disarmed
3 Flashes = Tamper Alert
4 Flashes = Open Zone Indication (after
arming)
5 Flashes = Shock Sensor Warn-away