Setting Up The Wl-Hdd2.5; Installing A Hard Drive - Asus WL-HDD2.5 Manual Del Usuario

Setting up the WL-HDD2.5

Installing a Hard Drive

Follow these steps to insert the hard disk and assemble
the device before using it.
1. Remove the screws from the bottom.
2. Remove the internal circuit board by pulling
the front panel cover in the direction of the
arrow.
3. Insert the hard drive into the slot. Make sure
that the hard drive connecting pins and the
connector are properly aligned.
4. Replace the front panel cover if required and
insert the circuit board back inside the casing.
5. Replace the screws.
6. Attach the external antenna for improved
performance.
4
All manuals and user guides at all-guides.com
ASUS 802.11g WL-HDD2.5