Setup; Connecting The 15 Pin Signal Cable And Power Card - AIRIS M190 Manual De Usuario

All manuals and user guides at all-guides.com

Setup

Connecting the 15 pin cable and power cord
01. Plug in 15 pin D-sub cable to the input port monitor and connect to
graphic card output port.
02. Plug in 24 pin DVI cable to the input monitor and connect to graphic
card output port.(option)
03. Plug the power cord into the AC receptacle located on the back of
the monitor.
04. Plug the line in cable into the audio card.
05. Plug the speaker jack cable into the monitor line out.
16