Explanation Of Symbols; General Warnings; General Safety Warnings - Kyocera TJEP GRF 34/100 Instrucciones De Seguridad Y Funcionamiento

Explanation of symbols

Symbols in manual
Read and understand tool labels and
manual. Failure to follow warnings
could result in serious injury.
Operators and others in work area
shall wear impact-resistant eye pro-
tection with side shields.
Operators and others in work area
shall wear hearing protection.
It is recommended that operator and
others in work area wear CE-marked
helmet at the job site.
Read all safety warnings and all
!
instructions before use.
Exercise caution as fastenings are
being fired.
!

General warnings

General safety warnings

• WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire,
serious injury and/or death.
• Use the tool and accessories in accordance with
these instructions, taking into account the working
conditions and the work to be performed. Use
of the tool for operations different from those
intended could result in a hazardous situation.
• Stay alert, watch what you are doing and use
common sense when operating the tool. Do not
use the tool if you are tired or under the influence
of drugs, alcohol or medication. A moment of
in-attention while operating the tool may result in
serious personal injury or damaged material.
• The risks to others shall be assessed by the
operator.
• Use CE-marked eye protection with front
and side protection against flying objects when
handling, operating, and servicing the tool.
• Use CE-marked ear protection near or at
the job site to prevent hearing damage. Un-
Symbols on tool
This tool is CE-approved according to
applicable standards.
Read and understand tool labels and
manual. Failure to follow warnings
could result in serious injury.
Operators and others in work area
shall wear impact-resistant eye pro-
tection with side shields.
Operators and others in work area
shall waer hearing protection.
P.MAX
X BAR Maximum operating pressure
(XXX PSI)
The tool is either equipped with a
bump fire trigger or a switchable trig-
ger. Exercise caution in use.
protected exposure to high noise levels can cause
permanent, disabling, hearing loss and other prob-
lems such as tinnitus (ringing, buzzing, whistling
or humming in the ears). Appropriate controls to
reduce the risk may include actions such as damp-
ing materials to prevent workpieces from "ringing".
• It is recommended to wear CE-marked head
protection at the job site.
• It is employer's responsibility to enforce tool users
and all other nearby personnel at the job site to
wear personal protective equipment such as eye
protection, dust mask, non-skid safety shoes, hard
hat and/or hearing protection.
• Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts to avoid serious injuries. Only
wear gloves that provide adequate feel and safe
control of trigger and any adjusting devices. Wear
warm clothing when working in cold conditions, to
keep your hands warm and dry.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
tool in unexpected situations.
• Prevent unintentional firing. Do not carry the tool
with your finger on the trigger. Keep fingers away
English
171