Menu Options - Manhattan 176156 Manual Del Usuario

remote control buttons & key identification
1 Mute on/off
2
Power on/off
3
Channel number keys
4
Single/double/triple digit
5
Return to previous channel
6
System time display
7
Current channel/info display
8 Default picture settings
9
Menu enter/exit

menu options

Press the "Menu" button to use the menu. Press the "Channel
up/down" buttons to highlight the option you want, then
press "Menu" to select that option. Press the "Volume up/
down" buttons to change the values/settings of the menu
option, then highlight "Exit" and press "Menu" when done.
Color options: Brightness; Contrast; Saturation; Hue.
Video options: Standard (PAL/NTSC/SECAM); Return (up to
previous menu level).
Channel options: TV System Standard (NTSC/PAL, M/PAL,
N/PAL, B-G/PAL, D-K depending on the tuner); Auto Scan
(for channel viewing: high speed recommended); Full Scan
(full frequency scan: low speed); Fine Tune (for finely
adjusting the frequency of the current channel); Skip (the
current channel); Return.
Display options: VGA (640 x 480); SVGA (800 x 600); XGA (1024 x 768); SXGA (1280 x 1024);
W1440S; W1280S; W1440P; Return.
OSD options: Pos. X (On-Screen Display movie X); Pos. Y (On-Screen Display movie Y);
Return.
Language options: English; Chinese; Portuguese.
troubleshooting
Problem: No picture or sound (not even "noise").
•
If the Power LED is off, check the connection of the AC/DC power adapter.
•
If the Power LED is on, check the connections to the monitor and sound device.
Problem: The picture is okay, but there is no sound (not even "noise").
•
Check the connection to the sound device.
•
Check the volume settings (including the Mute function).
Problem: The sound is okay, but there is no picture.
•
Check the connection between the monitor and the LCD TV Converter/Tuner.
•
Check that the monitor is on and not in a power-saving mode.
•
Confirm that the monitor can support high resolution: Press "Res" and wait a moment
to see if it's okay, or press "Res" again to change to a different setting.
Problem: There is no color in the picture.
•
Check the Saturation setting.
•
Increase the TV cable signal.
10 Video source
11
Channel up/down, volume
up/down and menu select
12
Multiple-picture preview
13
Resolution
14
Picture-In-Picture activation with
left and right positioning
2
1
3
4
6
7
9
12
14
eNglish
5
8
10
11
13
3