Publicidad
Idiomas disponibles
Idiomas disponibles
1. How to Connection to Input Sources
1.1 Connection to a PC
• P l eas e p o we r off t h e p roj e c to r a n d t h e i n p u t s o u rc e p r i or to c o n n e c t i o n ,
ot h e r w i s e, a fa u l t m ay o c c u r.
• P l eas e c h e c k w h et h e r t h e ca b l e c o n n e c t o r m atc h es w i t h t h e i n p u t i nte r fa c e of
t h e p roj e c to r p r i o r to c o n n e c t i o n . T h e i n s e r t i o n of a c o m p o n e nt i n a d i ffe re nt
s h a p e a n d w i t h a d i ffe re nt p i n n u m b e r m ay ca u s e e q u i p m e nt fa u l t o r d a m a ge .
• Use "SOURCE" to set the projector in the "PC" input mode.
• Set the display resolution and frequency at 1 , 2 8 0 × 76 8 a n d 6 0 H z res p e c t i ve l y i n c a s e
of c on n e c t i o n to t h e PC .
1.2 Connection to the AV input source
• Connect the input source (DVD, VCD, video recorder or camera) to the video input terminal of
the projector with an A/V cable (red/white/yellow, to be attached randomly).
1.3. Warm T ips:
• Use "SOURCE" to set the menu function as "AV" input after connection.
• Connect the video output and left/right audio channel output of the input source to the
corresponding input port of the projector.
2. How to switch on the Projector?
Operation:
2.1. Please confirm that the projector and all equipment connected to it are powered off.
2.2. Connect the PC or input source to the projector.
2.3. Remove the lens cap.
2.4. Connect the projector and the power socket with the power cable attached to the projector.
2.5. Power on all equipment connected to the projector.
If the input source needs to be operated before working normally, it shall be set in the normal
working state.
2.6. Power on the projector, and the power indicator light will become red.
Press [Power] on the host operation panel or [On/Off] on the remote controller, and the power
English User Manual
Publicidad
