T-Fal AQUASPEED Serie Manual De Instrucciones página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
1800110948-AQUASPEED ULTRACORD USA CAN
Never leave the appliance unattended when it is plugged in or during approximately 60
minutes that the soleplate remains hot.
Your appliance gives off steam, which may cause burns, especially when you are ironing on
a corner of your ironing board. Never direct the steam toward people or animals.
Your iron should be used and placed on a stable surface. When you put your iron onto its
heel or the iron rest, make sure that the surface on which you put it is stable.
Any inappropriate use or use contrary to these instructions releases the brand from all
responsibility and renders the guarantee invalid.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
Description
1.
Spray nozzle
2.
Anti-scale valve
3.
Steam control
4.
Spray Button
5.
Steam Button
6.
Auto-Stop safety warning light
(depending on model)
7.
Ergonomic grip
(depending on model)
8.
Electric power cord
9.
Lock-System ring to open and close the
Ultracord system
(depending on model)
Before first use
• Before using your iron with the steam function for the first time, we
recommend that you operate it in a horizontal position for a few
moments, away from your linen. Under the same conditions, press the
Steam button
a few times.
• During the first few uses, a harmless odour and smoke may be given
off. This has no effect on the use of the iron and will disappear quickly.
Preparation
What water to use ?
• Your appliance has been designed to operate using untreated tap
water. However, it is necessary to operate the Self-Clean function
regularly in order to eliminate hard water deposits from the steam
chamber.
• Heat concentrates the elements contained in water during
evaporation. The types of water listed below contain organic waste or
mineral elements that can cause spitting, brown staining, or
premature wear of the appliance: water from clothes dryers, scented
or softened water, water from refrigerators, air conditioners, pure
distilled or demineralised water or rain water should not be used in
your T-Fal iron.
24/09/07
15:18
Page 5
10.
Ultracord System
(depending on model)
11.
Water tank opening button
12.
Water tank filler flap
13.
Integral anti-scale system
(depending on model)
14.
Thermostat indicator light
Goes out when the temperature has been
reached
15.
Thermostat control
for choosing the ironing temperature
16.
Extra Stable heel
17.
Soleplate
Please read these
instructions
carefully. Remove
any labels from the
soleplate before
heating up the iron.
If your water is very
hard, it is possible to
mix tap water
with store-bought
distilled or
demineralised water
in the following
proportions:
- 50% tap water,
- 50% distilled or
demineralised water.
ENG
5

Publicidad

Tabla de contenido
loading

Tabla de contenido