English
• Slide the moving jaw (4) back.
Note: Apply the same pressure on the foot
pedal when unlocking as when locking.
Warning: Support the workpiece so that it
does not fall when the workpiece is
unlocked.
Clamping on one side of the jaw
8.3
(see Fig. M)
Large workpieces or workpieces with a
different shape can in some cases only be
fixed on one side of the jaws. Avoid exces-
sive use of the clamping force.
Clamping square workpieces
8.4
(see Fig. N)
The jaw pads (2, 3) are equipped with hori-
zontal and vertical grooves for clamping
square tubes and angled workpieces.
Clamping large objects
8.5
(clamping range> 450 mm) (see Fig. O)
For clamping large workpieces, the moving
jaw can be reversed so that the clamping
range is increased to 956 mm:
• Slide the moving jaw (4) out of the rail.
• Turn the moving jaw 180° and slide the
jaw back into the rail.
• The clamping range between 450 mm
and 500 mm must be bridged by means
of a spool of at least 50 mm wide, for
example a piece of wood or similar solid
material.
Warning: When clamping workpieces up to
the maximum clamping range, the work-
piece must rest on the moving jaw and
remain parallel.
Ensure sufficient stability when working
with long or large workpieces. The two front
legs are provided with holes with which the
front legs can be attached to the ground by
means of screws or clamps for better
stability.
Tips:
8.6
— Use a soft material between the work-
piece and the jaws if necessary to prevent
damage to the workpiece.
— Do not apply too much pressure on the
workpiece.
— Ensure that the workpiece is in balance.
8
9. Cleaning and maintenance
Check the product for damage over worn
parts before each use. Do not use the
device if there are damaged or worn parts.
Contact your supplier or manufacturer for
spare parts.
10. Storage
Store the Croc Lock and the accessories in
a dry and frost-free place.
11. Technical data
Max. weight: . . . . . . . . . . . . . . .150 kg
Footprint (standing):. . .101 x 106 x 87.5 cm
Dimensions (folded): . . 79.7 x 30 x 32.5 cm
Working height: . . . . . . . . . . . . 87.5 cm
Jaw size: . . . . . . . . . . . . . .20.5 x 8 cm
Clamping range: . . . . . . . . . 0 – 956 mm
Clamping force: . . . . . . . . . . . . 1000 kg
Product weight without accessories: . 19 kg
12. Accessories – optionally
available
Extension bar . . . . . . . Art.-Nr. 7060547
Log- and pole jaws . . . . Art.-Nr. 7060551
Standard support . . . . . Art.-Nr. 7060548
Roller support . . . . . . . Art.-Nr. 7060549
Tool tray. . . . . . . . . . . Art.-Nr. 7060550
Pipe jaws . . . . . . . . . . .Art.-Nr. 7061291
13. Disposal
Dispose of the packaging by sorting
into single type materials. Dispose
of cardboard and carton as waste
paper and foils via the recyclable material
collection service.
Disposing of the product
13.1
Dispose of the product in accordance with
the applicable laws and regulations for your
country.
The product and the user manual may be
subject to changes. Technical data may be
changed without prior notice.