Security Settings; Call Settings; Dual Sim Settings; Network Settings - Uniko 3 Guia De Inicio Rapido

12.4. Security settings

The phone lock password, SIM card password and PIN2 support 4-8digit numbers, do not support other characters. The default password of the phone
when leaving the factory is 1234.The PUK /PUK2 are required to input if you want to unlock the SIM card. The PUK/PUK2 is provided by the network
operator.

PIN: open or close the PIN lock function. When PIN lock is launched, the PIN shall be input upon each power-on.
 Modify PIN2: Input the correct PIN 2. Just can be change.( The SIM2 security setup is same to the SIM1 security setup.)

Phone locked: Open or close the phone lock function. When the phone lock is launched, the phone lock password shall be input upon each
power-on.
 Modify the cellphone password: You can change the phone password.

Privacy: If you select these modules for Data security, you must input the correct password when you want to view these modules.

Auto keypad lock: Set to lock the keypad.
 Lock screen by end-key: Activate, in the idle mode, you can use the power-key to lock the screen.

Fixed dialing: Add the numbers for fixed dialing.

Blacklist: You can check the black list number in here and set the feature whether need to act on calling or messaging. If you added the current
contact to blacklist you will be not received the call or messages from this number.

12.5. Call settings


Call divert: Divert an incoming call to a designated phone number under the presetting condition. This function can be launched or closed.

Call waiting: The network will inform you for a newly incoming call during the call. Please contact with your network operator to launch or close the
function because the function requires the network support.

Call barring: Set up the right of calling and answering. This function requires the network support. You can launch or close the function.

Hide ID: Default status is Display ID by network.

Others: The settings item include Call tome minute reminder, Auto redial, Vibration when connection, Reply SMS after reject and Auto record
voice call.

12.6. Dual SIM settings


Dual-SIM: You can set your phone network status, including Standby mode, Reply by original SIM, Set SIM name.

12.7. Network Settings

 Network selection: choice the modes of searching the phone network, including Auto and Manual modes.

12.8. Restore Factory

 Restore Factory: You can recover the phone settings into the initial settings with this function. The default password is: 1234.
All manuals and user guides at all-guides.com
11