Unitech TASHI MT688 Guía De Referencia Rápida página 6

All manuals and user guides at all-guides.com
Tap the arrow and set the correct time zone from the drop-down menu.
Check the box to enable Windows to automatically adjust for day-light
saving time.
Tap Apply to save the settings and exit the Date/Time Properties dialog, or
tap to exit without saving.
Using the Terminal Block
The MT688 provides two 12-position terminal blocks for input/output signals.
Insert the wire's stripped end into the desired terminal block position. Tighten
the lock screw to secure the wire.
Terminal Block Pin Assignment
J2 Terminal Block Port
Pin Name Description
1 D1+ Photo-IN Anode (+)
2 D1- Photo-IN Cathode (-)
3 D2+ Photo-IN Anode (+)
4 D2- Photo-IN Cathode (-)
5 D3+ Photo-IN Anode (+)
6 D3- Photo-IN Cathode (-)
All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Date Setting
Daylight Saving
Pin Name
7 D4+
8 D4-
9 PLC TX PLC TX
10 PLC RX PLC RX
11 12V
12 GND
Copyright 2009 Unitech Electronics Co., Ltd.
Time Setting
Time Zone Setting
Description
Photo-IN Anode (+)
Photo-IN Cathode (-)
External DC 12V input
GND