Tinkerbots TB1701 Manual De Instrucciones página 12

protection and overload protection.
Designation: micro battery system 2S2P HCC1325
Certification: UN 38.3, IEC 62133, UL2054
Capacity per battery system: 500mAh
Nominal voltage: 7.4V
External dimensions of battery system: ca. 29x28x28mm
To charge the Powerbrain's battery, the Powerbrain is connected
via the supplied power supply. The Powerbrain's battery can only be
charged using power supply, and not by means of a computer or other
devices.
In the event of a Powerbrain malfunction (e.g., the Powerbrain cannot
be switched off) please activate the reset switch (Button 3 & 4, Illus.
4). This will result in a restart of the Powerbrain.
WarninG – DanGer OF internal shOrt-
circuitinG
Damage to the Powerbrain through
external influences can damage the battery – danger of
internal short-circuiting. the eventuality of humidity penetration
cannot be excluded – danger through chemical reaction.
in the event of damage to, and deformation of the Powerbrain,
malfunction or heat development, the Powerbrain must immediately
be removed from operation and disposed of in an appropriate
manner. avoid all contact with any leaking fluids.
Do not throw or drop the Powerbrain. avoid damaging or
manipulating the Powerbrain (e.g., through drilling or welding,
soldering cables onto it, placing objects in it, etc.).
never throw the Powerbrain into an open fire or expose it to
temperatures above 50°c (122°F). shield from direct sunlight.
Do not bring into contact with fluids. shield from contact with
moisture, e.g. high humidity.
in the event of fire, do not extinguish the Powerbrain with water.
12
All manuals and user guides at all-guides.com
use only extinguishers of fire classification D (dry powder), or
smother flames with dry sand or woollen or cotton blankets. never
make contact with the burning Powerbrain with unprotected hands.
employ protective gloves or a shovel or tongs, and, if possible, place
the Powerbrain in the open air as soon as possible.
the Powerbrain contains a light-emitting diode (leD). Do not view
leD radiation directly with optical instruments – class 1M leD.
Viewing the leD output with certain optical instruments (e.g.
magnifying glasses and microscopes) from within a distance of 100
millimetres may be harmful to eyes.
the Powerbrain may only be opened by appropriately trained
personnel.
nOtice
Protection class ii, which display the following symbol:
c. Power supply
EU-Version
Model: HNP06-090L6
Input: 100-240VAC 50/60Hz, 0,35A MAX 100-240VAC 50/60Hz,
0,35A MAX
Output: 9V, 840mA,
The power supply may only be operated at room temperature (20 -
30°C / 68 - 86°F).
deformation to the power supply, or malfunction or heat development,
the power-supply unit must immediately be removed from operation,
to avoid the risk of fire or shocks. replace only with power-supply
units of the same type. the power-supply unit may only be used by
adults or under the supervision of adults. the power supply must never
be connected to devices other than the tinkerbots Powerbrain.
nOtice:
the Powerbrain may only be connected to devices in
DanGer – risK OF Fire Or shOcKs
power-supply unit from overheating; never cover them –
danger of fire. in the event of visible damage and/or
ensure that the plug socket being used is easily accessible.
US-Version
HNP06US-090L6
9V, 840mA
Protect the