General Safety Instructions - LaserLiner ClimaPilot Manual Del Usuario

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end
of these instructions. Follow the instructions they contain.
This document must be kept in a safe place and passed on
together with the device.
Function / Application
The device is used to measure relative humidity and ambient
temperature and to display the calculated dew point. Humidity
and temperatures are measured by means of high-speed sensors
integrated in the tip of the probe. Thanks to its low power con-
sumption, the device can also be used for long-term measurements.
The integrated min/max function allows the lowest and highest
measured values to be shown.

General safety instructions

– The device must only be used in accordance with its intended
purpose and within the scope of the specifications.
– The structure of the device must not be modified in any way.
– Do not expose the device to mechanical stress, extreme
temperatures or significant vibration
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility
regulations and limit values in accordance with EMC-Directive
2014/30/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol
stations or in the vicinity of people with pacemakers – may apply.
Electronic devices can potentially cause hazards or interference or be
subject to hazards or interference.
1
1
Sensor
2 LC display
3 Toggle measurement
in °C / °F
Toggle temperature /
dew point display
2
MAX MIN
5
3
°F °C RH
%
4
Switch on MAX/MIN values
5 On/off button (rear)
6 Battery compartment
(rear)
ClimaPilot
4
6
EN
05