Safety Warnings - Ferm AGM1086 Traducción Del Manual Original

ANGLE GRINDER
AGM1086 / AGM1087
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.

SAFETY WARNINGS

WARNING
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result
in electric shock, fire and/or serious
injury. Keep the safety warnings and
the instructions for future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Risk of personal injury.
Risk of electric shock.
Immediately remove the mains plug from
the mains if the mains cable becomes
damaged and during cleaning and
maintenance.
Risk of flying objects. Keep bystanders
away from the work area.
Wear safety goggles.
Wear hearing protection.
Wear safety gloves.
All manuals and user guides at all-guides.com
Do not press the spindle lock button
while the motor is running.
Risk of fire.
Double insulated.
Do not dispose of the product in
unsuitable containers.
The product is in accordance with the
applicable safety standards in the
European directives.
Additional safety warnings for angle grinders
• T he machine has been designed for use as
a grinder or cut-off machine. The machine is
not suitable for operations such as sanding,
wire brushing, polishing, etc. Risk of personal
injury.
• D o not use accessories which are not
specifically designed and recommended by
the manufacturer. Risk of personal injury.
• I nspect the machine and the accessories
before each use. Do not use accessories
which are bent, cracked, or otherwise
damaged. If the machine or one of the
accessories is dropped, inspect the machine
or the accessory for damage. If necessary,
replace the accessory.
• L et the machine run at no load in a safe area
after mounting the accessories. If the machine
vibrates strongly, immediately switch off the
machine, remove the mains plug from the
mains, and try to solve the problem.
• M ake sure that the maximum speed for the
grinding disc is larger than or the same as the
maximum speed of the machine. Refer to the
rating plate on the machine.
• O nly use grinding discs with the correct
thickness and outside diameter. Refer to the
rating plate on the machine.
• M ake sure that spindle diameter of grinding
discs, spacers, tension nuts, etc. correspond
to the diameter of the spindle on the machine.
• M ake sure that the grinding disc is properly
mounted. Do not use adapters or other aids
to mount grinding discs with another spindle
diameter.
5