Srhythm NiceComfort 75 Pro Manual Del Usuario página 11

Function Details
Easy Paring
1. Hold the Multi-function Button for 3-5 seconds to
turn headphone Bluetooth on,then enter
pairing mode.(the LED indicator light will be blue and
red flashing quickly.)
2. Keep headphone and your mobile phone as close
as possible during pairing process.
3. Turn on your mobile phone Bluetooth. Search for
headphone Bluetooth signal on mobile phone and
click "NC75 Pro" to pair.(the LED indicator light will
be blue flashing slowly after pairing successfully.)
4. If you are asked for a password/PIN code during
pairing procedure,please enter "0000" (four zeros).
Pair to the Second Bluetooth Device
1. Please make sure that headphone is connected to
the first Bluetooth device successfully and music is
not playing.
2. Hold the Multi-function button until the
headphone switch off and continue with the steps
"Easy Pairing"(Let the headphone re-enter pairing
mode,the LED indicator light will flash blue and red
alternately).
3. Pair headphone with the second device according
to "Easy Pairing" steps.
4. Return to the first Bluetooth device and pair it with
headphone again. Now both of your devices are
paired with headphone.
19
Active Noise Canceling(ANC) ON/OFF
To turn on ANC, press the ANC Button;
(the LED indicator light will be green when ANC ON.)
To turn off ANC, press the ANC Button;
(the LED indicator light green color will be off when
ANC OFF.)
Wired Mode
Headphone support AUX input for wired external
audio source connection. Simply turn headphone
Bluetooth off and plug in the audio cable.For any
ANC Bluetooth headphone,it is still need batter y
power support for wired mode.
ANC also works in wired mode.Microphones only
works in Bluetooth mode,not for wired mode.
Please note that CAN NOT adjust volume on
headphones in wired mode
20