Charging The Battery - Antec Mobile Products Pulse Manual Del Usuario

Charging the Battery

Turning the pulse On and Off
EN
All manuals and user guides at all-guides.com
Pulse contains a high-capacity Lithium battery that
should be fully-charged before using. Please use the
included micro USB cable to charge the pulse by
connecting the smaller end of the cable to the pulse and
then connecting the larger end to the USB slot of any
PC, Mac or charging station. The LED status indicator
will be RED while charging. When fully charged, the
LED will goes out and then the pulse will automatically
turn off when fully charged.
Note: You can still use the pulse while charging.
Before using the pulse, please note the left (L) and
right (R) ear cushions and adjust the pulse's headband
so that it fits securely atop your head and the ear
cushions comfortably cover your ears. To switch on the
pulse, press and hold the MFB button for about three
seconds, the pulse will emit a rising tone and the Blue
LED light will flash three times. To power off the pulse,
press the MFB button again. The pulse will emit a
falling tone and the Red LED will flash three times. The
pulse will auto shut off if it remains on and unpaired for
Five minutes.