Canyon CNA-BTHS02 Serie Guia Rápido

Article: CNA-BTHS02x
Package Contents
1.
BT headset
2.
Quick Guide V1.0
Hardware Overview
 Alternating red and blue LED indicate headset
has entered into the pairing mode and ready to
be detectable for the first time.
 Blue LED flashing slowly indicates the device is
powered on and connected.
 Solid red LED indicates the battery is charging.
Specification
Bluetooth Specification v3.0+EDR compliant

RF Frequency Range: 2.402-2.480GHZ, 2.4G ISM band

Frequency Response: 20 Hz – 16,000 Hz

Very high Signal to Noise Ratio (SNR):90 dB

Working distance : 10-15 M

Total Harmonic Distortion (THD): 0.08%

LED Indicator Status: Blue, Red

Rechargeable 360mAh Li-Polymer Battery: 3.7V 360mA

Bluetooth Headset
Quick Guide v1.0
EN
3.
USB2.0 charging cable
4.
Warranty Card
LED LIGHT
1.
Power button ON/OFF (press the
2.
button down for long time)
Volume up/down (Up switch the
button mean volume+; the headset
will make a beep if the volume are on
full blast; Down switch volume-, the
headset will also make a beep if the
volume are on min.)
Previous/Next (press the button
up/down for long time)
Play/Pause (when listening the
music, press button one time, the
music will be paused, press again,
the music will go on)
USB interface for charging
3.
Microphone
4.