Panasonic TY-ST05-S Instrucciones De Instalación página 6

Assembling the pedestal / Setting-up
Accessories for pedestal assembly
Assembly screw
...........................4
Assembling the pedestal
The numbers (such as
Assemble the poles correctly by referring to the illustrations below.
1. Installing the poles
For 42˝, 50˝ Display
(Outside)
Base
Pole
Insert the poles into the left and right holes in the
underside of the base so that they fit securely as
shown in the illustration above.
Setting-up
1. Setting up the display unit
Cloth or similar
Spread a clean cloth or similar material over a level
floor or base, and place the display unit on it face
down.
6
All manuals and user guides at all-guides.com
Assembly screw
(Black screw) ....4
) in the explanatory text indicate part numbers in the table of accessories.
Pole
For 37˝ Display (Inside)
Display unit
Pole ...................2
2. Securing the poles
Front
Pole
Use the assembly screws
firmly to the bottom of the base.
2. Securing the display unit
Front
* Carry out work on
a horizontal and
level surface.
Pole
Nameplate
Use the assembly screws
fasten securely.
Lift the display unit above the pedestal base, with
the back of the display unit on the same side as
the Nameplate. Then align the holes in the display
unit with the poles of the pedestal and lower the
display unit into place.
Base ..................1
Pole
Base
to secure the poles
Display unit
Rear
Pedestal
(Black screw) to