Control panel
Timer display
Power display
Control light
on/off
Keep
On/off key
warm key
USE OF THE APPLIANCE
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your finger
presses the key, the corresponding command is activated. This activation is validated by a
control light, a letter or a number in the display and/or a "beep" sound.
In the case of a general use press only one key at the same time.
Display
Display
Designation
0.
Zero
1...9
Power level
U
No pan detection
A
Heat accelerator
E
Error message
H
Residual heat
P
Power Booster
L
Locking
U
Keep warm
II
Stop&Go
∏
Bridge
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation starts his high speed
when the hob is intensively used. The cooling fan reduces his speed and stops automatically
when the electronic circuit is cooled enough.
Power selection zone "SLIDER"
and timer setting zone
Description
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Automatic cooking.
Electronic failure.
The heating zone is hot.
The Power Booster is activated.
Control panel locking.
Maintain automatically of 70°C.
The hob is in pause.
2 cooking zones are combined.
8
Control light timer
Control light
cooking zone
Control light
Stop & Go
Power
Booster key
Stop & Go
key