Bresser 40-25840 Instrucciones De Uso página 19

Press and hold the Mode button (Fig. 2, 4) to change the measurement unit. The measurement
unit in the display will then alter.
5. Press Mode button (Fig. 2, 4) a few times to select the operating mode you want to work with.
Read chapter "Display System" (item 6) to learn more about the available operating modes.
6. Then aim the central circle (Fig. 3, 9) at the object.
7. To make a measurement press the function button (Fig. 2, 5) one time briefly. The distance or
speed of the object will be shown at the top of the function display.
8. Press and hold the button to use the Live-Mode. In Live-Mode, you always have the current dis-
tance displayed. After 20 seconds, the function is automatically switched off, but you can always
go back to Live-Mode if you press and hold the button again.
9. The rangefinder has four modes that can be selected in sequence after turning on by pressing
the Mode button (Fig. 2, 4). The mode in use is shown at the bottom of the function display (Fig.
3, 16-18). Please refer to the chapter "Display System" (item 6) for further information on this.
10. The power would be switched off automatically after approx. 15 seconds if the distance-measur-
ing instrument is not used.
Note: Distance measuring with the Rangefinder is affected by the characteristics of the object (color,
surface finish, size and shape), the angle of the emitted laser beam to the target and the lighting
conditions (e.g. the visibility of weather). If the object is large, the color of the object is bright (highly
reflective), the surface is smooth and shiny, and the laser beam is vertical with the surface of the
- 19 -
DE
GB
FR
ES
IT
NL
PL
RU