Trust Sp-3500X 2.1 Manual Del Usuario

SP-3500X 2.1 Speaker Set
Introduction
This manual is intended for users of the TRUST 1600P 2.1 SOUNDFORCE. This
speaker set is for use with your computer, but is also suitable for use with your
portable audio equipment, such as an MP3 player, or cassette player.
This speaker set includes a powerful sub-woofer (for the bass tones), perfect
satellites for the higher tones, and a separate amplifier for volume and tone
adjustment.
This product complies with all essential requirements and other relevant
stipulations of the pertinent European directives. The Declaration of Conformity
(DoC) is available on www.trust.com/13733/ce.
Safety
1. Remove the power plug from the wall socket before cleaning the speaker
set. Do not use any liquid cleaners or spray cans. Wipe the loudspeaker set
clean with a moist cloth.
2. Never use the loudspeaker set in the vicinity of water.
3. Ensure that no objects or furniture stand on the power cord. Do not place
the loudspeaker set where the power cord may become worn.
4. Never insert any object, of any kind, into any of the openings in the
loudspeaker casings.
5. Do not attempt to repair the speaker set yourself. The set should only be
maintained by qualified personnel.
Connections (see figure 1)
1. Connect the audio cable to the "LINE-OUT" (= line) socket or the "SPEAK"
(= loudspeaker) socket of the sound card. (If necessary, consult the
product's manual).
2. Connect the other end of the audio cable to the "Audio input" of the
amplifier.
3. Connect the left and right satellite loudspeaker to the sockets "Speaker Out
L" and "Speaker Out R"; connect the sub-woofer to the socket labelled
"SUB".
4. Connect the power plug of the sub-woofer to the socket "AC IN".
5. Lastly, plug the power cord into the wall socket.
You may possibly find extra cables/audio adaptors in the box. These cables can
be used to connect your gaming console, for example.
Operation
Before you turn the speaker set on, turn the volume control completely to the left,
so that the sound is off. This avoids possible damage to the unit, and your ears.
The Bass and Treble knobs can be set to a neutral (middle) position.
1. Switch the speaker set on (knob 1, figure 2). The lamp (1, figure 2) will light
up.
2. Have an audio signal play back from the computer, e.g. by playing an MP3.
Ensure that the audio settings of your computer are correct.
3. Adjust the sound level using the volume knob (3, figure 2).
4. By turning the knobs for Bass (low tones) (4, figure 2) and Treble (higher
tones) (5, figure 2) you can regulate the sound as you wish.
All manuals and user guides at all-guides.com
UK
Troubleshooting
Problem Cause Possible solution
No sound Audio cables not Check that the audio cable is correctly
from the correctly connected to the sound source and the
speakers connected to the amplifier.
sound card.
Power not Check that the power connector is
connected correctly plugged into the "AC IN" socket.
properly
Check that the main power cord is
correctly plugged into the wall socket,
and that the power socket is switched
ON.
Volume knob is Set the Volume harder.
set too soft.
Speaker switched Turn the loudspeakers on.
off.
Too much or Sound balance Adjust the sound to suit using the Bass
too little by means of bass and Treble knob.
bass or (low tones) and
treble in the treble (high
sound tones) not set
correctly
Problem not Latest FAQ Go to www.trust.com/13733 for FAQ and
in this list. update available other product information.
on internet.
If, after having attempted all these solutions, you still have problems, please
make contact with one of the Trust Customer Care Centers. You should in any
case have the following information ready: the article number (in this case 13733)
and a good description of exactly what is not working, and when.
Conditions of guarantee
- Our products carry a 2-year factory guarantee, starting on the date of
purchase.
- In case of defect, return the product to your dealer with an explanation of the
defect, proof of purchase and all accessories.
- During the period of guarantee, you will receive back from your dealer a
comparable model, when this is available. Should this not be available, the
product will be repaired.
- For missing components such as manual, software or other parts, please make
contact with our helpdesk.
- The guarantee ceases to apply in the event of tampering with a product,
mechanical damage, misuse, modifications to the product, repair by third
parties, carelessness and using the product for a purpose other than the
intended.
- Exclusions to the guarantee
•
Damage caused by accidents or disasters, such as fire, flood, earthquake,
war, vandalism or theft.
•
Incompatibility with other hardware or software that are not mentioned in
the minimum system demands.
•
Accessories such as batteries and fuses (as applicable).
- On no account is the manufacturer responsible for any incidental or
consequential damage, including loss of income or other commercial losses,
arising from the use of this product.