RocketFish RF-ACRHB Guia Del Usuario página 5

Component
Power connector
Power LED
Installing your USB hub
To connect your USB hub:
1 Plug the AC power cord into a power outlet, then plug
the other end into the power connector on your USB
hub.
2 Plug the A mini connector on the A-B mini USB cable into
a USB 2.0 port on your computer, then plug the B mini
connector into the upstream port on your USB hub.
Note: If you use a USB 1.1 port on your computer, all devices
connected to your USB hub will run at the slower USB 1.1
speed.
3 Plug the USB cables from the USB devices into any of the
downstream ports.
Description
Plug the AC power cord into this
connector and into a power outlet.
Note: If you do not connect your USB
hub to a power outlet, the devices you
connect may not work.
This LED lights red when your USB hub
is receiving power.
RF-ACRHB 5