Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INFLATE RAFTS AND MATTRESSES
1
The high volume air pump is used for inflatables only (more
specifically high volume/low pressure applications) and cannot be
used for tires and balls, which require higher pressure.
1. Attach the desired inflation adapter (connected to the air hose) to
the high volume air hose. Connect high volume air hose to the high
volume inflate portal on the front of the inflator. Insert opposite end
into the inflatable's air inlet.
2. Plug power cord into 12 volt accessory power outlet, rated 15 amps
or higher.
3. Press the power button on the inflator for high volume inflation.
Once desired pressure is reached, turn off inflator. Unplug power
cord and remove all connections.
CORD CONTROL
1
How to utilize the cord control feature:
1. Wind the cord clockwise around the four pronged wing.
2. Slide 12 volt adapter into recessed area.
3. Tuck extra cord into the cord cinch on bottom of inflator.
2
2
3
3
Publicidad
Tabla de contenido
