General Safety Instructions - IKRA AHS 6024 LI-E Instrucciones De Manejo

4. Safety instructions
Noise emission information in accordance with the Ger-
man Product Safety Act (ProdSG) and the EC Machine
Directive: the noise pressure level at the place of work
can exceed 80 dB(A). In such cases the operator will
require noise protection (e.g. wearing of ear protectors).
Attention: Noise protection! Please observe the lo-
cal regulations when operating your device.
Interference suppressed in accordance with EN 55014,
EN 61000-3-2, EN 61000-3-3.
We reserve the right to make changes to the technical
specifications.
The devices are manufactured in accordance with the
provisions of EN 60745-1and EN 60745-2-15 and fully
comply with the provisions of the German Product Safe-
ty Act.
General safety instruction
Usage of hedge trimmer always involves a risk of
accidents, therefore please observe the relevant
accident prevention instructions.
The machine has been constructed according to the lat-
est technology and in accordance with the recognised
technical safety regulations. Nevertheless, use of the
machine can involve risks to the user or third persons,
and can cause damage to the machine or other objects.
Attention: Using electric power tools, you must observe
following fundamental safety instructions to protect
yourself against electric shock, against danger of inju-
ries and danger of fire. Read all these instructions be-
fore using the hedge trimmer and observe them. Keep
these safety instructions at a safe place.
Use the machine in a safety conscious manner for suit-
able applications in a technically perfect condition only
and with due regard to the operating instructions! Im-
mediately rectify or have rectified any faults which could
adversely affect safety!
This machine may cause serious injuries. Please read
the instruction manual carefully as to the correct han-
dling, the preparations, the maintenance and the proper
use of the hedgetrimmer. Familiarize yourself with the
machine before the first use and also have yourself
introduced to practical use of the machine.
This appliance is not intended for use by persons (in-
cluding children) with reduced physical, sensory or men-
tal capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person respon-
sible for their safety. Children should be supervised to
ensure that they do not play with the appliance.
5. Application
The machine is only intended for trimming hedges. Use
for any other purpose constitutes inappropriate use. The
manufacturer / supplier is not liable for any injury and/
or damage arising from inappropriate use. This risk is
the sole responsibility of the user. Appropriate use of
the machine also includes adherence to the operating
instructions and compliance with the servicing and
maintenance instructions.
Always keep the instruction manual close at hand du-
ring operation!

6. General safety instructions

Attention! Read all instructions contained herein. Fail-
ure to observe the following instructions may result in
electric shock, burns and/or severe injury. The term
'power tool' used in the following includes both mains-
operated tools (with mains supply) and battery-operated
tools (without mains supply).
KEEP THESE INSTRUCTIONS CAREFULLY
1) Working area
a) Keep your working area clean and tidy. Untidy
and poorly lit working areas may lead to ac-
cidents.
b) Do not operate the tool in potentially explosive
environments containing combustible fluids,
gases or dusts. Power tools generate sparks that
may ignite dusts or fumes.
c) Keep children and other persons away when
you are operating the power tool. Distractions
may result in the operator loosing control over
the tool.
2) Electrical safety
a) The mains plug of the power tool must fit
into the mains socket. The plug must not be
modified in any way. Do not use adapter plugs/
connectors in combination with tools with
protective earthing. Unmodified plugs and fitting
sockets reduce the risk of electric shock.
b) Avoid physical contact with earthed surfaces
as pipes, heaters, ovens and refrigerators.
There is an increased risk of electric shock if your
body earthed.
c) Keep the tool out of the rain. The penetration
of water into a power tool increases the risk of
electric shock.
d) Do not use the cable to carry or hang up the
tool or to pull the plug out of the socket. Keep
the cable away from heat, oil and sharp edges
or moving parts of the tool. Damaged or tan-
gled cables increase the risk of electric shock.
e) When operating a power tool outdoors, use
exclusively extension cables that are approved
for outdoor-use. The use of an extension cable
that is suitable for outdoor use reduces the risk of
electric shock.
3) Personal safety
a) Always pay attention to what you do and apply
reasonable care when working with a power
tool. Do not use the tool when you are tired
or under the influence of medication, drugs
or alcohol. When working with power tools even
a short moment of inattentiveness may result in
severe injury.
b) Wear personal protection equipment and al-
ways wear eye protection (safety goggles).
Wearing personal protection equipment as a dust
mask, nonslip safety shoes, safety helmet or ear
GB-3
!