Security; Pin Code Request - LG KP235 Manual De Usuario

2_KP235_SpainEng(ORG)_080605
PRS
n you
end
ection.
d
d
twork
arer
]
<GPRS settings>
The service settings are only
available when GPRS is chosen as
a bearer service.
- APN: Input the APN of the
GPRS.
- User ID: The user identification
for your APN server.
- Password: The password
required by your APN server.
- Primary server: Input the IP
address of the primary DNS
server you access.
- Secondary server: Input the IP
address of the secondary DNS
server you access.
Delete: You can delete the selected
profile.
2008.6.5 1:41 PM

Security

PIN code request

(Menu 3.5.1)
In this menu, you can set the phone to
ask for the PIN code of your SIM card
when the phone is switched on. If this
function is activated, you'll be
requested to enter the PIN code.
1. Select PIN code request in the
security settings menu, and then
press [OK].
2. Set On/Off.
3. If you want to change the settings,
you need to enter PIN code when
you switch on the phone.
4. If you enter the wrong PIN code
more than 3 times, the phone will
lock out. If the PIN is blocked, you
will need to key in the PUK code.
5. You can enter your PUK code up to
10 times. If you enter the wrong
PUK code more than 10 times, you
cannot unlock your phone. You will
need to contact your service
provider.
Page 37
Menu 3.5
37