Technical Specifications - Starlyf PORTABLE VAC Manual De Instrucciones

the filter
26. Please use 5V---2A adapter or
charger to charge device.
27. Please do not block the vent.
WARNING (BATTERY):
- DO NOT TRY TO OPEN, REPAIR
OR DISMANTLE THE BATTERY.
- DO NOT SHORT-CIRCUIT THE
BATTERY
- THE BATTERY MAY EXPLODE IF
DISPOSED OF IN FIRE.
- THE BATTERY SHOULD BE CHAR-
GED ONLY WITH THE SUPPLIED
CHARGER.
- THERE IS A RISK OF EXPLOSION
IF THE BATTERY IS REPLACED
WITH THE WRONG TYPE.
- DISPOSE OF OR RECYCLE SPENT
BATTERIES ACCORDING TO THE
INSTRUCTIONS.
The set includes:
Main Components & Accessories: Fig. 0
1. Power
2. Air outlet
3. ON/OFF button
4. Lighting Switch
5. Battery charge indicator
6. Nozzle/Dustbin
7. Dust proof cover
8. Crevice Tool
9. Brush
10. Cable
STARLYF® PORTABLE VAC ASSEMBLY
INSTRUCTIONS:
STARLYF® PORTABLE VAC consists of
the main unit, which holds the motor, lithium
rechargeable battery and dustbin (6).
The main unit has a connector opening
where the accessories can be attached.
(See "ACCESSORIES
Fig.4)
STARLYF® PORTABLE VAC CHARGING
INSTRUCTIONS:
• Before using for the first time, please
charge the product (1).
• Please use 5V, 2 A adaptor or charger to
charge the device using the cable (10).
• The LED pilot light will blink while the de-
vice is charging (5).
• The light will stop blinking when the devi-
ce is fully charged.
• Do not charge the battery for more than
12 hours. Overcharging can reduce the
charge duration. Do not let the battery die
before recharging it.
• The device will be completely charged
in around 4 hours and will run for approxi-
mately 20 minutes, depending on individual
use.
• Once fully charged, unplug the charger
from the device and the cable from the ma-
ins.
INSTRUCTIONS FOR USE:
Once the battery has been properly char-
ged, you can start using Starlyf® Portable
Vac.
Open the dust proof cover (7) before use
(fig. 1).
Connect the accessory you plan to use to
the vacuum's fixed connector opening (6)
until it fits well.
The Starlyf® Portable Vac motor has one
speed. It will be activated by pressing the
ON/OFF button (3). Fig.2
Lighting button (4) has two positions: by
pressing once light on the top of Starlyf®
Portable Vac will turn ON, while by pressing
twice the guide light from the edge next to
the nozzle (6) will turn on. Fig.3
ACCESSORIES ASSEMBLING (Fig. 4)
The product comes with the following two
accessories:
• A crevice tool for cleaning corners or na-
rrow gaps to collect dust (8)
• A brush for cleaning soft surfaces (9)
Insert the crevice tool (8) into the nozzle (6)
as shown in fig.4.
Both, crevice tool and the brush can be
connected simultaneously (fig. 4).
CLEANING INSTRUCTIONS (Fig.5):
- Do not clean Starlyf® Portable Vac with
chemical products such as volatile liquids
or solvents. Do not immerse it in water. Use
a damp cloth and a non-abrasive cleaning
product or mild soap. Allow to air dry.
- To clean the dustbin (6), rotate the
nozzle and remove the filter and empty the
dustbin into the rubbish. Rinse the dustbin
and let it air dry.
- To reinstall the nozzle dustbin, put the
filter into the nozzle dust chamber. Then
rotate in the opposite direction to close the
dustbin.
- Make sure to empty and clean the dust
ASSEMBLING"
chamber regularly.

TECHNICAL SPECIFICATIONS

Device
Input power: 5V
Suction Power: 4000Pa
Power consumption: 55W
Battery
Voltage: 7.3V
Material: Li-on
2600mAh
5