DeLOCK Thunderbolt 42513 Manual Del Usuario página 3

Hardware Installation
Note:
Follow the general instructions for installation of the enclosure. If necessary, read
the manual of your computer, or ask a specialist for help.
1. Open the housing and take out the bracket together with the board.
2. Connect your SATA HDD to the SATA connector.
3. Fasten the HDD to the board by using the included screws.
4. Insert the HDD into the housing and use the screws to attach the panel to
housing.
Driver Installation
Windows 7/8 (32/64-bit)
Please note:
For Windows: the Thunderbolt™ certified driver needs to be installed
before you connect the device.
1. Switch on your computer.
2. Put the driver CD in the CD ROM drive and open it. Start "Setup.exe" by
"double click".
3. Follow the instructions of the driver installation.
4. Restart your system after the installation.
5. Connect an optional Thunderbolt™ cable to the enclosure and a free port of
your computer.
6. The external drive will be recognized and you can start using the device
immediately.
You can also download the driver from our homepage:
http://www.delock.com/produkte/G_42513/treiber.html
Mac OS 10.7, Mac OS 10.8
1. Switch on your Mac.
2. Connect an optional Thunderbolt™ cable to the enclosure and a free port of
your computer.
3. The external drive will be recognized and you can start using the device
immediately.
- -