All manuals and user guides at all-guides.com
Malfunction
Possible causes
TouchControl
Dirt in the guide rails.
does not move out
completely.
The larder is overloaded.
TouchControl
The TouchControl does not
opens, the toothed
have power supply.
rack remains
extended.
Power failure
Thermal overloading has
triggered.
TouchControl
The front adapter has not been
does not close
fixed.
completely.
Drive is blocked.
Malfunction in the system.
If you are unable to rectify the problem, please disconnect the TouchControl system from the
electricity supply and contact the manufacturer's customer service department.
Never open the drive unit. Current carrying components
are installed in the device. Danger to life!
Danger
Remedy
Cleaning of the guide system.
Mind the permissible loading
weight.
If necessary, plug in the socket
or re-establish the power supply on
the device.
- Check the built in fuses
- Consult an authorised
electrician
Separate the system from the
mains and have the malfunction
repaired by the customer services.
Fix the front adapter using the
securing screw.
- Remove any objects that may
block the drive
- Separate the system from the
power supply and report the
malfunction to the customer
services
Open the larder pull-out unit
manually up until end position and
close it again.
OPERATING INSTRUCTIONS TOUCH CONTROL
l
19