Before Using Your Kettle; Using Your Kettle - Highland KE01401Z-UL Manual De Instrucciones

BEFORE USING YOUR KETTLE

If you are using the kettle for the first time, it is recommended that you should clean your kettle before
use by boiling the Max capacity of water once and then discarding the water twice. Wipe the surface
with a damp cloth.

USING YOUR KETTLE

• Place the kettle on the flat surface.
• To fill the kettle, remove it from the power base and open the lid by pressing down lid release button,
then fill the kettle with the desired amount of water and close the lid. The water level must be within
the Min and the Max level. Too little water will cause the kettle switching off before the water has
boiled.
• Insert care, maintenance and/or storage instructions text here.
NOTE: Do not fill the water over the maximum level, as water may spill out of the spout when boiling.
Ensure that the lid is firmly in place before plugging the power outlet.
• Position the kettle on the power base.
• Connect the plug into a power outlet. Press down the switch and the indicator will light up, and then
the kettle starts to boil the water. The kettle will switch off automatically once the water has boiled.
If necessary, it will take you 30 seconds to wait before pressing the switch again to re-boil the water.
You may shut off the power by lifting switch up or directly lift the kettle from the power base at any
moment to stop boiling process.
NOTE: Ensure that switch is free of obstructions and the lid is firmly closed, the kettle will not turn off
if the switch if be constrained or if the lid is opening.
• Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as boiling water may result in scald,
besides, don't open the lid while the water in the kettle is hot.
• The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power
base when not in use.
NOTE: Always disconnect the power supply when not use.
Boil-dry protection
Should you accidentally let the kettle operate without water, the function of boil-dry protection will
automatically switch off the power. If this occurs, allow the kettle to cool prior to filling with cold water
before re-boiling.
Notes on the cord plug:
This appliance has a polarized plug. To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way, If the plug does not fit fully into the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
3