Using Your Appliance - Anjou AJ-PCA023 Guia Del Usuario

USING YOUR APPLIANCE

Choose one of the following ways to use the appliance:
6
Solid
°C °F
Solid Start
Canned
Canned Increment Reduction °C/°F
1. One Touch Mode：
• Solid Wax Bean Button (Fig. 6)
1. This appliance defaults to a solid wax bean mode with an ideal temperature of
85°C / 185°F.
2. Add an appropriate amount of wax beans into the can and cover the lid.
3. Tap the Solid Wax Bean Button once, and wait for approx. 25-30 minutes until 3 beeps
are heard and the LED display shows 85°C / 185°F. Now the wax beans inside the warmer
arewell melted and ready for use.
Working Principle： The Wax Warmer will heat the wax beans to the maximum temperature
(120°C / 248°F) first and keep that temperature for 12 minutes to fully melt the wax beans,
then bring the temperature back to the ideal with three beeps. The display will show the
ideal temperature (85°C / 185°F).
04
°C °F
Solid Start
Canned
Increment Reduction °C/°F
°C °F
Start
°C °F
Solid
Increment Reduction °C/°F
Canned Increment
7
°C °F
Solid
Canned Increment Reduction
Start
Reduction °C/°F
• Canned Wax Button ( Fig. 7 )
1. The ideal temperature for the canned wax is 75°C / 167°F by default.
2. Add canned wax into the can and cover the lid.
3. Tap the Canned Wax Button once, and wait for approx. 25-30 minutes until 3 beeps are
heard and the LED display shows 75°C / 167°F. Now the wax inside the warmer are welled
melted and ready for use.
Working Principle： The Wax Warmer will heat the wax beans to the maximum temperature
(120°C / 248°F) first and keep that temperature for 12 minutes to fully melt the wax, then
bring the temperature back to the ideal with three beeps. The LED display will show the ideal
temperature (75°C / 167°F).
Note:
· 120°C / 248°F is the ideal temperature to melt the wax while 85°C / 185°F and 75°C / 167°F
are the ideal temperatures for hair removal.
· The default temperature is for reference only. You are recommended to test the temperature
of the wax on the inside of the wrist first then adjust the temperature as needed. Please
refer to the "Manual Mode" section for more instructions.
°C °F
Solid Start
Start
Canned Increment Reduction °C/°F
°C/°F
°C °F
Solid Start
Canned
Increment Reduction °C/°F
°C °F
Solid Start
Canned Increment Reduction °C/°F
05