Remote Control Led Status Indicators; Preventing Water Damage To Your Camera - Evolveo SportCamW7 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 110
Remote Control
Press and hold the Photo button
ON / OFF
Camera ON / OFF
Press the Power button
Take a Photo
Press the Photo button
Record a Video
Press the Video button
* Turn OFF both the camera & remote to shut down this function.
Remote Control Status LED indicators
Green
Red
Blue
Red
* LED turns OFF when the battery is fully charged

Preventing Water Damage to Your Camera:

1. Keep the rubber seal clean with fresh water and dry after every use.
2. After every use in salt water, please rinse the case in fresh water.
3. Clean the seal, rinse in fresh water and shake dry.
* Failure to follow these instructions each time you use the camera can result in leaks that may damage or destroy your
camera. Your warranty does not cover water damage resulting from a user error.
HIGH TEMPERATURE DANGER WARNING
After two hours of continuous recording the camera will warm up and it is advisable to let it cool
down.
Stop recording and let the camera in the Standby mode for a while. However, the camera is
equipped with a thermal protection function that protects it from damage due to extreme use.
Technical specifications changes and errors reserved!
Thanks to the fast technical progress the products are often innovated and upgraded. For latest information visit
www.evolveo.eu.
for 3 seconds.
ON
Photo taking
Video recording
Charging*
41
V2.0

Publicidad

Tabla de contenido
loading

Productos relacionados para Evolveo SportCamW7

Tabla de contenido