BASIC OPERATIONS
EN
Power on/off
To power on, press the 'Play/Pause/Power On' button (Ref.4). Press the 'STOP'
button twice (Ref.5) to turn off the player. If the player will not be used for an
extended period of time, ensure that it is switched off.
Hold
While the player is in use, you can switch the Hold button to the 'Hold' position
(Ref.11). This will place the unit in 'Hold' mode. In 'Hold' mode, the buttons will be
inactive. If any button is pressed while the unit is in 'Hold' mode, the screen will
display a lock icon in the top right hand side.
Battery Use
Slide open the battery cover (Ref.10) and insert 2 x AA batteries (included) into
the battery compartment. Ensure that the polarities are correct and the negative
(-) side is aligned with the smooth end of the battery, and the positive side (+) is
aligned with the opposite end of the battery. 2 new AA batteries will provide for
approximately 7 hours of battery life.
AC Adapter Use
To use the CD10 connected to a wired power source, connect the USB charging
cable (included) from any standard USB 2.0 connection (such as a laptop or mains
USB adapter) to the charging port on the device (Ref.13).
6