Adjust Baudrate; Inserting Paper; Attaching The Printer - Mettler Toledo RS-P42 Manual De Instrucciones

2.2

Adjust Baudrate

1
2
1 2
DTS-2
2.3

Inserting paper

2.4

Attaching the printer

• Open cover of paper compartment (1) and remove paper roll.
• Press plastic tab (2) backward and open the compartment
cover.
Baudrate
1200/8/N/None
2400/7/E/None
9600/8/N/Xon-Xoff
9600/8/N/None
• Feed paper through the slot in the printing unit in the direction
of the arrow.
• Switch on printer with toggle switch at the rear.
• Press and hold until sufficient paper has been fed in.
• Attach connection cable of the RS-P42 to the printer interface
of the instrument and to the printer.
After configuring the attached instrument for the RS-P42, the
printer is ready for operation.
RS-P42 Printer
Dip-Switch
1 2
on off
off off
off on (Factory setting)
on on
5