Inserting The Rechargeable Battery - HumanTechnik cm-BT Instrucciones De Servicio

CM_BT_1008:BA_CM_BT.qxd
Inserting the rechargeable battey
The device runs on one rechargeable "AAA"-type battery. It can also run on a
non-rechargeable battery.
Where necessary, only use original a replacement rechargeable battery.
If you run your CM-BT on a disposable battery, don't place the transmitter onto
the CM charger.
Ensure that the rechargeable battery are placed the right way
around into the battery compartment. The stipulated installation
direction is indicated on the bottom of the battery compartment.
N.B. This rechargeable battery is not adequately charged upon
delivery and has to be! charged fully on the CM charger first of all.
1. Switch off the CM-BT .
2. Remove the battery compartment cover
3. Place the supplied rechargeable battery into the battery compartment (note
the polarity!).
4. Place the cover onto the battery compartment.
5. Place the CM-BT into the CM charger.
The green LED on the CM charger glows throughout the charging process.
The battery is fully charged after 12 hours.
17.11.2008 07:52 Seite 21
English 21