Care, Cleaning And Storage - LEGEND FORCE LF20212RT Guía De Uso Y Cuidado

Care, Cleaning and Storage

Follow the steps below to prepare your tiller for storage.
□
Protect wheels and axles from rust by removing the lockpin
and sliding the wheel off the hub.
□
Coat the axles lightly with axle grease.
□
Slide wheel back on hub and insert lock pin.
□
Drain fuel system completely or add fuel stabilizer to prevent
fuel from gumming up during extended storage period.
□
While engine is still warm, drain the oil from the engine.
Refill with fresh oil of the recommended grade.
□
Clean external surfaces, engine and cooling fan.
□
Remove spark plug, pour one ounce of SAE 30 oil into spark
plug hole.
□
Plug hole and pull starter cord slowly to distribute oil evenly
in cylinder head area.
□
Reinstall spark plug.
□
Transport unit to a suitable storage location. If you have
chosen to use a fuel stabilizer and have not drained the fuel
system, follow all safety instructions storage precautions in
this manual to prevent the possibility of fire from the ignition
of gasoline fumes. Remember, gasoline fumes can travel to
distant sources of ignition and ignite, causing risk of
explosion and fire.
□
If there is any possibility of unauthorized use or tampering,
remove the spark plug and store it in a safe place before
storing the rototiller unit.
□
Be sure to plug the spark plug hole to prevent foreign
material from entering.
WARNING: Do not store tiller in an unvetilated area where
fuel fumes may reach flame, sparks, pilot lights or an ignited
object. Drain fuel outdoors away from any ignition sources.
Use only approved fuel containers.
21
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM