Programmed Disc Play - Roadstar HRA-1500MP Manual De Instrucciones

3 English
4. Continuously pressing the Reverse (16) Skip Track Button makes the CD
player skip back through the disc track by track. Once the beginning of the
first track is reached, the CD player will not go back any further.
Manual Search
During playback, pressing the Forward or Reverse Skip / Search buttons will

cause the player to scan through the current track. At the end of a track the
player will skip to the next track and continue scanning. At the beginning of a
track the player will skip to the previous track and continue scanning.
 When the player reaches the end of the final track, or the beginning of the first
track, it will stop scanning.

PROGRAMMED DISC PLAY

It is not possible to enter programs during disc play. Press the Stop button (13)
first, then follow the instructions below.
1. Press the PROGRAM button (15). "01" will flash on the LED display and the
Program Indicator (12) will light up.
2. Press the Forward and Reverse Skip Track buttons to select the track to be
stored in position1.
3. Press the PROGRAM button (15). The first program selection is now stored
in the program memory 1.
4. Select the next track to be programmed using the Forward and Reverse Skip
Track (16/17) buttons. Press the PROGRAM button (15) to store this track.
5. Continue entering tracks in this way until all the desired tracks are stored (up
to a limit of 20).
6. When the PROGRAM button (15) is pressed to store the 20th track, the di-
splay will return to the 1st program location. Press the PROGRAM button
(15) to step through the program locations.
Listening to Programmed Tracks
Press the Play Pause button (18). Disc play will start at the beginning of the first
programmed track.
To Clear The Program Memory
If the disc is playing, press the Stop button (19) to stop the disc. Switch the
Function (8) selector to MW or FM to clear the Program.
REPEAT DISC PLAY
During playback, repeatedly press REPEAT BUTTON (14) on the remote control
to select:
Repeat1: The current track is played repeatedly.

RepeatAll: All tracks are played repeatedly.

Normal mode: The tracks are played in classic order.
