Introduction; Safety Information; Features; Installation - EVGA BQ Serie Manual Del Usuario

650W / 750W / 850W Power Supply User Manual
Introduction: Premium Power
Thank you for purchasing an EVGA BQ 80 PLUS ®
is a high quality power supply that offers great value to gamers / system builders. The modular design provides
custom cable configurations for any application, and due to the ultra silent Teflon Nano-Steel Bearing 140mm fan,
the 650 BQ / 750 BQ / 850 BQ series reduces heat during heavy load while keeping the decibel level down. Designed
with stability and durability in mind, the 650 BQ / 750 BQ / 850 BQ series is the perfect choice to power your systems.

Safety Information

WARNING 1: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will
void the product's warranty. EVGA will not be responsible for any result of improper use, including but not limited to,
any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online.
(Warranty information is available at www.evga.com/support/warranty
www.evga.com/manuals).
WARNING 2: NOT ALL MODULAR CABLES ARE THE SAME OR COMPATIBLE! Use of a non-officially supported cable
may void your warranty, cause a Power Supply failure, and/or cause damage to connected devices. Please use ONLY
officially supported cables included with the Power Supply, or an officially supported set of alternative cables listed for
your specific model of Power Supply made BY EVGA. EVGA will NOT be responsible for damages caused to your power
supply, devices, or non-officially supported modular cables in the event damage is caused by your use of non-officially
supported modular cables.

Features

STABLE POWER
The 650 BQ / 750 BQ / 850 BQ has outstanding electrical performance with
clean power output. This can help you achieve the highest possible overclock (optional) and provide the most
stable and reliable power to all components. The 650 BQ / 750 BQ / 850 BQ also provides
88% (230V~) efficiency and is 80 PLUS ® BRONZE
TOP QUALITY PROTECTIONS
The 650 BQ / 750 BQ / 850 BQ comes equipped with the most comprehensive protection set possible, including Over
Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection
(SCP), Over Temperature Protection (OTP), and Over Current Protection (OCP). This product is also covered by a
5-year warranty
and EVGA's legendary customer service and support.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures
to any system. Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help
management as well as airflow throughout the system.
English
BRONZE series power supply. The 650 BQ / 750 BQ / 850 BQ
and this manual is available at
ultra stable voltage
and
up to 85% (115V~) /
certified.
with better airflow overall and provide a clean look
free up space inside the case and improve cable
2

Installation

1. Remove the power supply from its packaging.
2. (Optional) Using the provided PSU testing tool, connect the 24-Pin cable to the
PSU, then attach the testing tool to the 24-Pin cable. Connect the ATX power cable
to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan
to use. Once connected, turn the power switch to the ON position.
Please note: If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/draining/testing water cooling
components without the need of a paperclip or other device.
3. Use the screws provided with your case to install the power supply into your
computer. NOTE: It is recommended to install the power supply with the fan
facing down. However, if your case places the power supply at the bottom of the
case and there are no ventilation holes available, it may be best to install the
power supply with the fan facing up for greater efficiency and reliability.
4. Connect the 20+4-Pin ATX cable to the motherboard.
5. Connect the 4+4-Pin EPS12V cable to the motherboard.
(Optional) – If you plan on
motherboard supports additional 8-Pin CPU power connectors,
extremely
connect the second 4+4-Pin EPS12V cable. This is
for heavy overclocking or for Dual CPU motherboards.
6. Connect the 6/6+2-Pin PCI-E cables to your graphic card(s).
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin
connector without first detaching the two extra pins.
650W / 750W / 850W Power Supply User Manual
extreme overclocking and your
only needed
3
English