Operation By Remote Control - Bubble BXLAMP01 Manual De Usuario

USER GUIDE

Operation by remote control

(please remove the plastic tab from the battery cover before use).
1.Standby: press to enter/leave. Standby mode after powering the speaker on.
2.Change brightness.
3.Switch on/o the light.
4. Switch to Bluetooth mode.
5. Go to selected single color directly.
6. Press it repeatedly to change colors in a loop.
7. Switch light to Flash mode (Beats to music).
FLASH
8. Switch light to Smooth mode (Breathing light slowly change colors)
SMOOTH
9. Switch to white color directly.
W
10. Go to previous/next track (not workable under AUX mode).
11. Play and Pause.
12. Volume - and +
13. Switch to AUX or USB-play mode.
AUX USB
Notes:
1. The above operations and sequence are based on factory default setting.
2. Speaker memorizes previous lighting status before turn-o , when you turn it on again, it will
display the same lighting mode/color/brightness.
AUX connection
1. Connect the AUX cable (not included) to the AUX jack.
2. Insert the other end of the cable into the headphone or LINEOUT jack of the external device.
Maintenance recommendations
• Regularly clean the product with a dry cloth. The product must be disconnected or
switched o when you clean it.
• Keep the connectors and/ or ports free from dust, lint, etc. to prevent improper
connections.
• Avoid breaking the device. Do not put objects over it or bend it too strong.
• If the product includes a cable do not bend it too strong and do not pull from it to unplug
the product.
• Do not wet the product. Keep it always in a dry place, away from humidity.
• When not using the product, store it in a place free from dust, dirt, lint, liquids, etc.
z• If water or other liquids enter the product interior, unplug it immediately from any
attached power source or device it is connected to.
• Avoid dropping or hitting the product. It might be damaged.
• Do not use the product for anything other than its intended use.
• Please recycle the product in accordance with local environmental laws and regulations.
Safety information
Please read the following instructions before using the device for the first time:
• When you use device keep it away from heat sources (fire) and from humidity sources
(water and other liquids).
• If the product is wet or damaged do not us it.
• Do not use the product with wet hands.
• Do not leave the product in contact with flammable materials.
• Do not expose the product to high temperatures (for example: inside a car during hot
weather)