Portfolio Outdoor FY05-030 Manual Del Usuario página 3

ASSEMBLY INSTRUCTIONS
1.Take off cap nuts (AA) . Then attach the crossbar
(EE) by tightening the machine screws (CC)
securely into the outlet box (not included).
The mounting screws (DD) should protrude away
from the outlet box.
Hardware Used
B
AA
Cap nut
B Machine screw
CC
B
DD Mounting screw
B
EE
Crossbar
2. Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers, black
to black (power) and white to white (neutral).
Attach copper wire to ground wire. Helpful
hint: If necessary, attach copper ground wire
to grounded junction box.
3. Attach wire nuts (BB). Tape wire nuts (BB)
and wires together.
.
Hardware Used
BB Wire nut
1
x 2
x 2
EE
x 2
AA
CC
x 1
2
3
x 3
BB
Lowes.com/portfolio
4
ASSEMBLY INSTRUCTIONS
4. Install the flying ring (A) onto the fixture (B).
DD
5. Place fixture (B) onto mounting screws (DD).
Then secure with cap nuts (AA).
Hardware Used
AA Cap nut
Mounting screw
DD
6. Install light bulb (not included). Use one 60-watt
max. standard-base bulb or one 13-watt standard-
base CFL bulb.
• Note: Before use, add silicone glass sealant between wall and canopy, leaving the bottom clear
so moisture can drip down.
4
5
DD
x 2
x 2
B
6
Lowes.com/portfolio
5
A
B
AA